VVS Diamond Guide: Definition of very, very slightly included | LearningJewelry.com™ (2023)

• Are VVS diamonds the best clarity grade?
• Should I buy VVS clarity diamonds?
• Do I need VVS clarity for my engagement ring?

What is VVS Diamond Clarity?

A VVS clarity grade diamond is a diamond that has been graded according to the clarity level "Very, Very Little Included"Gemological Institute of AmericaDiamond clarity scale. The GIA is also responsible for other diamond properties such as cut quality, clarity grades, color grades and carat weight.

GIA-StandardDiamond clarity scaleconsists of the following levels:

When a diamond appraiser evaluates the clarity of your diamond, he is evaluating its importanceInclusions and imperfections in your diamond.. Inclusions and blemishes are natural features that affect all gemstones.

Inclusions are found in both mined and lab-grown diamonds. However, due to their isolated environment, laboratory diamonds tend to have less obvious inclusions. Mined diamonds can come into contact with many different minerals and elements in the earth, which can lead to inclusions and imperfections.

Some embedded diamonds may be embedded in a way that affects their durability. Inclusions closer to the surface can affect durability. Certain imperfections (inclusions confined to the surface) can also compromise durability if accidentally struck.

Inclusions are judged by the size, color/cut, location and prominence of a diamond. Each lab has a very specific certification process. And with VVS diamonds it is more difficult.

The VVS diamond clarity level consists of two properties: VVS1 and VVS2 diamonds. Of all GIA graded diamonds, only 5% are VVS diamonds. VVS mined diamonds can be incredibly rare, especially when all other diamond quality factors are equally high.

VVS diamonds are consideredPure diamond clarity for the eyes. A diamond that is clear to the naked eye is a diamond whose inclusions and flaws are not visible to the naked eye.

However, they can show inclusions at 10x magnification. Even under magnification, inclusions in a VVS diamond are difficult to see. These are usually small spots on VVS diamonds called teeth. Inclusions of this type do not affect durability or increase sensitivity.

What are VVS1 diamonds?

VVS1 diamonds are the highest clarity level of the VVS clarity level. These diamonds have very small inclusions that are not visible at 10x magnification. However, at greater than 10x magnification you can see small inclusions.

Here are some examples of what VVS1 diamonds look like at 40x magnification:

What are VVS2 diamonds?

VVS2 diamonds are the lowest grade of VVS clarity diamonds. VVS2 diamonds are still considered extremely clear and easy on the eyes. However, you may be able to see very small inclusions when looking at a VVS2 diamond at 10x magnification.

Here is a pair of VVS2 diamonds magnified at 40x:

The difference between VVS1 and VVS2 diamonds

The main difference between a VVS1 diamond and a VVS2 diamond is that one VVS diamond (VVS2 diamond) will have inclusions visible at 10x magnification, but the other (VVS1 diamond) will not.

VVS1 and VVS2 diamonds can be priced from a few hundred to thousands of dollars apart, but most people wouldn't be able to tell the difference between the two with the naked eye.

VVS1 and VVS2 diamonds are clear to the eye, however VVS1 diamonds are rarer and more valuable when other diamond factors are the same as VVS2 diamonds.

Diamantes VVS vs Diamantes VS

Both VVS and VS diamonds are considered clear to the eyes. VVS diamonds are just above VS clarity. VS diamonds are described as "Very Minimally Included" and consist of two grades: VS1 and VS2.

Although these examples are at 40x magnification instead of 10x magnification, you can get an idea of ​​the difference between VS clarity diamonds and VVS clarity diamonds.

VVS and VS diamonds are so close together on the clarity scale that they look the same to the naked eye. But the price difference is thousands.

Even if a VS diamond has inclusions that are darker or larger than a VVS diamond, this does not mean that they affect durability. A VS diamond is considered a high quality diamond with a clarity grade.

Here is a rough price comparison of James Allen VVS and comparable VS diamonds.

Both diamonds exhibit exceptional brilliance, symmetry and proportion. They differ slightly in panel size, fluorescence and aspect ratio.

Look at meComparison of VS1 and VVS2 diamonds.

VVS Diamonds vs. Internally Flawless (IF) and Flawless (F) Diamonds

You already know that VVS diamonds, especially VVS1 diamonds, are very rare. But compared to lens clean diamonds and internally clear diamonds, the quality of VVS diamonds is not as rare as these qualities.

According to the GIA, internally flawless diamonds represent less than 1% of diamonds graded by its laboratories. The clarity level of a flawless diamond is less than 0.1% of GIA graded diamonds.

If you compare the cost of a VVS diamond to that of a flawless internal clarity diamond, you should expect the price to increase by about 5-20%. Sometimes even more. The determining factor here is how other quality factors are evaluated as comparable.

With a VVS diamond, the price difference is much greater compared to a flawless diamond. It is possible that for onehigh quality 1 carat VVS diamondThe price difference is tens of thousands of dollars over a flawless diamond of similar quality.

How much do VVS diamonds cost?

The diamond pricing process goes beyond the simple clarity scale. The proportion, symmetry, shape, color quality and table carat weight of your VVS diamond are also important pricing factors.

As a general rule of thumb, a VVS1 diamond is likely to cost more than a VVS2 diamond, all other factors being comparable.

With so many different factors that go into the jewelry buying process, it's hard to give a definitive number.

If we did the math, we could say that VVS diamonds can range from $5,000 to over $20,000. This range generally covers everything1 carat diamond costs. Higher carat weight VVS diamonds easily exceed this range.

How to find the price per carat of VVS diamonds

When shopping for an engagement ring, you will find that most jewelers mark their diamonds with a price per diamond or per engagement ring. But how can you know if you're paying the right price for quality VVS diamonds if you're not sure what they are?

Each diamond is priced per carat and some diamond consultants will price your diamond on this basis. Diamond prices per carat can be displayed as follows: $750 per carat for a 3 carat diamond. $750 x 3 = 2,250. The total price of the diamond is $2,250. However, please note that this price is for a loose diamond only, not the ring setting or any treatment design you choose.

You can find the price per carat of a VVS diamond by following three simple steps:

1. Evaluate what diamond qualities you are looking for. This allows you to compare VVS diamonds of similar quality from different diamond dealers.

2. To find the price per carat, the total price is divided by the total carat weight of the diamond (note that this only works with a loose diamond, not a pre-set diamond engagement ring).

3. Also remember that even if two VVS diamonds have the same shape, color grade, clarity grade and carat weight, they may not be the same in comparison. Specific details like symmetry, polish, table size, diamond certification, etcaspect ratioalso contribute.

Be sure to read all the details about the diamond and not just the 4 C's of diamond quality.

Is it a good clarity VVS diamond?

VVS diamonds are among the highest grades on the clarity scale. Considered top clarity. So yes, a VVS diamond has an excellent level of clarity.

But is it necessary?

If you can afford a VVS diamond without sacrificing the other qualities of your diamonds, then buy VVS diamonds.

However, if you're wondering how to stretch your budget to allow for a VVS level of clarity, I'd advise sticking with it.

There is no doubt that VVS represents the purity of the eyes and the high clarity of your engagement ring. On the other hand, both a VVS diamond and a VS diamond have no inclusions visible to the naked eye.

VS diamonds can show larger inclusions at 10x magnification, but the average person isn't going to examine their diamond that way, right? Most people will not even notice obvious inclusions in SI diamonds as long as they are of excellent cut quality.

I'm thinking why pay for something you and others can't see? If you look at VS diamonds and VVS diamonds side by side, they look the same. However, the price difference can range from $500 to $1500.

Where can you buy VVS diamonds?

Now that you are an expert on VVS diamond clarity, you may be wondering where to buy VVS diamonds. Luckily we have already written this article as our ownThe best places to buy VVS diamonds.

And if you want to know more about VVS diamonds, read our related articles:

• VVS1-Diamonds
• vvs2 Diamonds
• VVS1 vs VVS2 Diamonds